CR 85-X D
IGITIZER
Switching on the CR 85-X
Before switching on
Make sure that the following conditions are met before you switch the CR 85-
X on:
•
A service technician has appropriately connected the CR 85-X and has
carried out a performance test.
•
You have read the safety precautions at the beginning of this manual and
you will observe them while working with the CR 85-X.
•
You are acquainted with the basic functions of the Digitizer.
Switching on the CR 85-X
Locate the main switch and place it in position 'ON'.
22
Introducing the CR 85-X
4450A EN 20060221