Joining; Roll Lens - Cooper Lighting Corelite Continua SQ4 Installation Instructions Manual

Installation Instructions - Continua SQ4 Suspended LED
4

Joining

Ensure all tabs are bent upward for joining and
making electrical connections. Close all tabs once
complete. Slide next fixture onto hanging fixture until
biscuit joiners engage. Make wiring connections and
push wires into housing prior to sliding the fixtures
firmly together. Once fixtures are together fasten
joiners using the provided #8-18 x 5/8 HWH screws.
4
Cooper Lighting Solutions
C
2X
Installation instructions
5

Roll Lens

IMPORTANT: If conditions are dusty/dirty,
recommended practice is to keep lens roll(s) in
plastic packaging and install once conditions are
clean. Install roll lens using clean work gloves.
IMPORTANT: Energize fixture to test LEDs and
confirm they are all lit before beginning Roll Lens
install.
One person hold roll lens at one end of fixture (as
shown) while another person pulls lens through.
IMPORTANT: Ends of lens should overhang fixture
by ¼" at each end. Trim lens where necessary.
DO NOT UNDER-CUT.
0.25"
4