Installation Instructions - Continua Sq4 Suspended Led; System Overview; Mount Spacing - Cooper Lighting Corelite Continua SQ4 Installation Instructions Manual

Installation Instructions - Continua SQ4 Suspended LED

System Overview

SQ4 Joint Kit(s)
• (x4) Biscuit Aligners (A)
• (x2) Cast joiners (B)
• (x4) #8-18 x 5/8 HWH Screws (C)
NOTE: 1 kit required for each fixture-to-fixture joint

Mount Spacing

Maximum distance of flexible mount location from end of unit: 1' for 4' unit, 1' for 6' unit, 2' for 8' unit 4' for 12' unit. Maximum
distance between mounting points shall not exceed 12 feet.
AIRCRAFT CABLE CAN BE ADJUSTED INWARD.
MOUNTING POINTS EQUAL
FIXTURE LENGTHS 4', 6',8' or 12'
POWER FEED
FIRST SECTION FIRST SECTION
For installation at ceiling, see separate ceiling interface instructions.
2
Cooper Lighting Solutions
Fixture 1
Installation instructions
Fixture 2, 3, 4...
SQ4 Roll Lens
NOTE: 1 lens per run (up to 100')
SQ4 End Kit(s)
• (x1) Die-Cast Endcap
• (x2) Cast joiners (B)
• (x4) #8-18 x 5/8 HWH Screws (C)
NOTE: 2 kits required for each run
(one for each end)
MOUNTING POINTS EQUAL
FIXTURE LENGTHS 4', 6', 8' or 12'
***CONSECUTIVE SECTIONS ***CONSECUTIVE SECTIONS
2