Page 2 of 2
Step 3
Attach center table top slat to supports using 2 1/4" long carriage
bolts, lock washers and hex nuts. Position both arm struts on
the middle table strut, attach to strut and middle slat using a 3"
long carriage bolt, flat washer, lock washer and hex nut, leave
loosely tightened. Attach both support arms to lower table support
lbracket using 1" hex bolt, flat washer, lock washer, and hex nut.
Connection Detail
Step 4
Attach the remaining table top slat to the supports and middle
strut using 2 1/4" long carriage bolts, lock washers and hex nuts.
All hardware can now be tightened.
As of 10/2019