NETGEAR ProSafe WFS709TP Hardware Installation Manual page 28

WFS709TP ProSafe Smart Wireless Switch Hardware Installation Guide
For more information on LED behavior, see
2. Check the fans to verify they are working.
You should be able to hear the fans operating and feel significant airflow blowing from the
chassis vents at each of the three fan positions.
Warning: If one or more fans do not work, immediately shut down and contact
3. Connect appropriate network cables (see
port and cable information).
4. Perform the initial setup as described in Installation Guide: WFS709TP ProSafe Smart
Wireless Switch.
2-8
NETGEAR.
Appendix A, "Cables and Connector Pinouts"
v1.0, May 2007
"System Indicator LEDs" on page 1-2.
for
Installing the Chassis