www.wtliving.com
PREPARATION
Before beginning assembly, be sure to empty contents of carton and make sure all parts are present. If any parts are missing,
please contact Customer Service at (866)-985-7877, Monday-Friday, 9 a.m. - 6 p.m. EST or email at cservice@welltraveled.net.
Place all parts on a soft, level surface for assembly. To properly assemble this heater, you need the supplied assembly wrench
(or use your own). DO NOT over tighten hardware!
1
Connect the Tube to the Base by screwing.
2
Place the power cord plug through the Top Pole, Middle Pole
and Bottom Pole. Pull the power cord through the bottom of
the Base as far as it will go.
3
Take out Nuts (x2) and Press Clip (x1). Secure the power cord
on the Base. Replace and tighten Nuts and Press Clip.
Fully Assembled Diagram
Contact us for assistance: (866) 985-7877 | www.wtliving.com
3
3