Multi-Speed Vfd Display Kit - Carrier WeatherExpert 48LC 14 Series Service And Maintenance Instructions

230V/460V
575V ONLY
Fig. 53 — VFD Location
Multi-Speed VFD Display Kit (Field-Installed
Option)
NOTE: The Remote VFD Keypad is part of the Multi-Speed VFD
display kit (PN: CRDISKIT002A00) which is a field-installed op-
tion. It is not included with the 50LC size 14-26 base units.
The VFD keypad (as shown in Fig. 54) consists of the follow-
ing sections.
ALPHA NUMERIC DISPLAY
The LCD display is backlit with 2 alpha-numeric lines. All
data is displayed on the LCD.
MENU KEY
Use the Menu key to select between Status, Quick Menu or
Main Menu. The triangle icon at the bottom of the LCD dis-
play indicates the currently selected mode. (See number 5 in
Fig. 55.)
NAVIGATION KEYS AND STATUS LEDS
The Navigation keys and Status LEDs are detailed in Fig. 56.
ALPHA
NUMERIC
DISPLAY
MENU KEY
NAVIGATION
KEYS
AND
STATUS
LEDs
Fig. 54 — VFD Keypad
1
1-20 Motor Power
2
[2] 0.12KW-0.16HP
3 Setup 1
Parameter number and name.
1
Parameter value.
2
Setup number shows the active setup and the edit setup. If the
same set-up acts as both the active and edit set-up, only that
setup number is shown (factory setting). When the active and edit
3
setup differ, both numbers are shown in the display (SETUP 12).
The flashing number indicates the edit setup.
The symbol in the number 4 position in the figure above indicates
motor direction. The arrow point either clockwise or counter-
4
clockwise to show the motor's current direction.
The position of the triangle indicates the currently selected menu:
5
Status, Quick Menu or Main Menu.
Fig. 55 — LCD Alpha Numeric Display
52
1-20 Motor Power
[2] 0.12KW-0.16HP
Setup 1
Status Quick Main
Menu
Menu Menu
Com.
OK
On
Warn.
Alarm
Hand Off Auto
On Reset On
OPERATION KEYS & LEDs
4
5