Download Print this page

Powering The Headset On And Off; Muting A Call - Plantronics SupraPlus Wireless Headset System Setup Manual

Plantronics wireless headset system setup guide
Hide thumbs Also See for SupraPlus Wireless Headset System:

Advertisement

U
SING YOUR
WITH YOUR DESK PHONE
For your safety, do not use headset at high volumes for extended periods of time. Doing so
can cause hearing loss. Always listen at moderate levels. For more information on headsets
and hearing visit: www.plantronics.com/healthandsafety
If your desk phone has a volume control, set it to mid-range.

Powering the Headset on and off

If the headset is charged and the base is connected to power, the headset is automatically on.
The SupraPlus Wireless does not have an ON/OFF button.
Placing, Answering, or Ending Calls on your Desk Phone
Desk phone
Confi guration
To place a call
To answer a call
To end a call

Muting a Call

To mute headset, press the mute button
straight in. Press again to unmute.
Talk indicator light on base will fl ash while
muted.
You will hear 3 rapid beeps every 15 seconds
to indicate that mute is on.
Volume settings are pre-set at the factory and for most phones will not require
adjustment. To ensure settings are correct for your phone, make a test call. If
you can not hear or be heard clearly, refer to the volume adjustments on the
following pages.
10
Plantronics SupraPlus W
S
P
UPRA
LUS
ALL phones with
Handset Lifter
1. Press Call Control Button
2. Dial number
1. Press Call Control Button
1. Press Call Control Button
Setup Guide
ireless
W
H
IRELESS
Phones
Headset
WITHOUT
button and NO Handset
Lifter
1. Press Call Control Button
2. Remove handset from cradle
3. Dial number
1. Press Call Control Button
2. Remove handset from cradle
1. Press Call Control Button
2. Place handset back on cradle
EADSET
Phones
Headset button
WITH
and
Handset Lifter
NO
1. Press Call Control Button
2. Press Headset button on phone
3. Dial number
1. Press Call Control Button
2. Press Headset button on phone
1. Press Call Control Button
2. Press Headset button on phone

Advertisement

loading