Download Print this page

Plantronics SupraPlus Wireless Headset System Setup Manual page 6

Plantronics wireless headset system setup guide
Hide thumbs Also See for SupraPlus Wireless Headset System:

Advertisement

3
C
ONNECT
A. Connect Headset Base to power outlet
1
. Plug the Base Power Adapter into a wall outlet, then plug the power cord into the
labeled connector on the bottom of the Headset Base. The
front of the Headset Base will turn on. (See illustration on page 13.)
B. Charge the Headset for at least 20 Minutes before using
1
. Slide the earpiece with microphone into the charging cradle as shown below.
2. Gently press down on the earpiece until fully seated into the cradle. The
Status light on the base will fl ash to indicate the headset battery is charging. (See
illustration on page 13.) A solid light indicates full charge. A full charge will take
approximately 3 hours.
6
Plantronics SupraPlus W
P
C
OWER AND
Insert into
connection on Headset Base as
shown to charge.
Headset Base
(bottom view)
Setup Guide
ireless
H
HARGE
EADSET
RED
labeled power
YELLOW
YELLOW
Power light on the left
Base
Power
Adapter
Charge
AMBER

Advertisement

loading