Ambient Conditions; Used Standards - Bosch Rexroth IPC 40.2 Project Planning Manual

IPC 40.2
4.4

Ambient Conditions

Max. ambient temperature
(surrounding air temperature)
Max. temperature gradient
Relative humidity
Air pressure
Mechanical strength
4.5

Used Standards

DOK-SUPPL*-IPC*40.2***-PR02-EN-P
Operation
+5 °C... +45 °C
Temporal temperature changes up to 3 °C
per minute
Climatic class 3K3 according to
EN 60721, condensation not permissible.
Up to 2000 m above sea level according
to DIN 60204
Max. vibration:
Frequency range: 10 ... 150 Hz
Excursion: 0.075 mm
for 10 ... 57 Hz
Acceleration: 1 g
for 57 ... 150 Hz
According to EN 60068-2-6
Fig. 4-4: Ambient conditions
The system components of the IPC 40.2 correspond to the following
standards:
Standard
EN 60,204-1
EN 50,081-2
EN 50,082-2
EN 60,742
EN 60,950
EN 61,131
EN 61 131-2
EN 418
EN 60 529
EN 60 068-2-6
EN 60 068-2-27
Fig. 4-5: Used standards
Note: Concerning delivered IPC 40.2 all CE requirements are
fulfilled. After plugging-in extension cards, however, a new CE
test has to be executed.
Storage/transport
-20 °C to +60 °C
Not defined
Climatic class 3K3 according to
EN 60721, condensation not permissible.
Max. shock:
15 g according to
DIN IEC 68-2-27,
no disturbance of the function
Meaning
Electrical equipment of machines
Basic technical standard, emitted interference
(industrial environment)
Basic technical standard, noise immunity (industrial
environment)
Transformer for 24 V power supply unit, protective
separation
Overvoltage category II
Requirements concerning the 24 V outputs
Requirements concerning the 24 power supply
Machine safety, EMERGENCY STOP devices
Degrees of protection (incl. housings and installation
compartments)
Vibration test
Shock test
4-3
Technical Data