Installation And Assembly - Ortech LEDFP-3-43 Manual

Fireplaces
MODEL LEDFP-3-43 | LEDFP-3-50 | LEDFP-3-60

INSTALLATION AND ASSEMBLY

Your appliance is a wall-mounted, recessed and/or mantel installed appliance. Select a suitable location that is
not susceptible to moisture and is away from drapes, furniture and high traffic areas.
IMPORTANT REMINDER: Follow all National and local electrical codes
Minimum Clearance to Combustibles
Minimum Mantel Clearances
WARNING:
When using paint or Lacquer to finish the
mantel, the paint or lacquer must be heat
resistant to prevent discolouration.
RECESSED TO WALL INSTALLATION
Step 1
info@ortechindustries.com
www.ortechindustries.com
Step 2
Step 1 Selection a dry wall to open a hole for fireplace box. Size of
hole listed in the Framing Hole Size table chart on the left
Step 2 Using the screw driver to take off the screws from the front
Step 3 Have two adult people to pull of the glass panel and take it out
13376 Comber Way 375 Admiral Blvd
Mississauga
Surrey BC V3W 5V9
,
ON L5T 2N1
Instruction Manual
Step 3
1-888-543-6473
1-888-541-6474