Thank you for purchasing the High-Speed JIG Grinding Air Turbine Spindle " PLANET 600 ". This
Air Turbine Spindle is designed for I.D. grinding and can be installed on milling machines, jig boring
machines or special purpose machines. The Air Line Kit (with Lubricator) and a compressor are
required to drive this Air Turbine Spindle. Read this and all the associated component Operation
Manuals carefully before use. Always keep this Operation Manual in a place where a user can referred
to for reference at any time.
CONTENTS
1. CAUTIONS FOR HANDLING AND OPERATION ·········································
2. BASIC PACKAGE ·················································································
3. WARRANTY ·························································································
4. CONTACT US ·······················································································
5. FEATURES ···························································································
16. TROUBLESHOOTING ············································································
1.
CAUTIONS FOR HANDLING AND OPERATION
■ Read these warnings and cautions carefully and only use in the manner intended.
■ These warnings and cautions are intended to avoid potential hazards that could result in personal
injury to the operator or damage to the device. These are classified as follows in accordance with
the seriousness of the risk.
Class
Existence of a hazard that could result in personal death or
DANGER
serious injury, if the safety precautions are not followed.
A safety hazard could result in bodily injury or damage
WARNING
to the device if the safety instructions are not properly
followed.
A hazard that could result in light or moderate bodily injury
CAUTION
or damage to the device if the safety instructions are not
followed.
Degree of Risk
P17
P20
P21
P21
P21
P22
P23
P24
P25
P26
P27
P28
P28
P29
P31
P31
P33
17