Jig Grinding Method In A Vertical Milling Machine - Nakanishi PLANET600 Series Operation Manual

Anti-Rotation Bar
(Standard Accessories)
Block (Not Included)
(not included / provided
by the end-user)
14.

JIG GRINDING METHOD IN A VERTICAL MILLING MACHINE

DANGER
・ Be sure to rotate the main spindle of the milling machine in less than 120min
Rotating the main spindle in more than 120min
to disconnect from the Air Turbine Spindle that can lead to tool breakage, a serious
accident and severe injury.
・ Be sure to mount the Anti-Rotation Bar to the Air Turbine Spindle when installing it on
a vertical milling machine. If you do not attach the Anti-Rotation Bar to the Air Turbine
Spindle, it may cause the supply air / oil hose to become tangled, causing a serious
accident and or injury.
WARNING
When installing the Air Turbine Spindle to a vertical milling machine, ensure that the
vertical milling machine is grounded in order to avoid risk of an electric shock.
CAUTION
When installing the Air Turbine Spindle in the machine spindle, do not hit, drop or cause
shock to it at any time. This may cause damage to internal components and result in
malfunctions and loss of accuracy.
Fig. 11
(rpm) may cause the Air Supply Hose
-1
Boring Head
Reducer
Outward Rotation
Ring
-1 (rpm).
29