Fema DCM Series Assembly And Operating Instructions Manual page 46

8.2 Electrical data
Connection plan: The terminal board can be accessed after the protective casing has been
removed. After connecting the supply lines, the protective casing should in all cases be
reattached.
Switching element: Single-poled, changeover microswitch.
Protection of the conductive connection: Can be accessed after removing the terminal
board casing.
Earthing connection / potential equalisation: External on the outside of the switching unit.
The maximal cross section of the cable is 4 mm
Switching power:
3 A 250 V AC, 2 A 250 V AC (inductive)
0,03 A 250 V DC, 3 A 24 V DC
8.3 Pressure connection as for 1.3
With increasing pressure 3–1 will be interrupted and 3–2 will be
closed.
2
.
46