Download Print this page

Russell Hobbs 20611 Instructions Manual page 7

Advertisement

C CLEANING THE FILTER
14 Switch the kettle off, and let it cool.
15 Open the lid.
16 Push the top of the filter down and back, into the kettle, to
release the hooks on the top of the filter from the rectangular
holes at the top of the spout.
17 Lift the filter out of the kettle, to disengage the bottom hook
from the hole at the bottom of the spout.
18 Rinse the filter under a running tap while brushing with a soft
brush.
19 Lower the filter into the kettle, and engage the bottom hook in
the hole at the bottom of the spout.
20 Press the top of the filter gently down and towards you, to force
the hooks on the top of the filter into the rectangular holes on
either side of the spout.
21 Close the lid.
7

Advertisement

loading