MiFleet +Vision Setup Manual
Camera configuration
Hide thumbs
Also See for +Vision:
- Hardware install manual (9 pages) ,
- Quick start manual (2 pages) ,
- Quick start manual (2 pages)
Related Manuals for MiFleet +Vision
Summary of Contents for MiFleet +Vision
- Page 1 Camera Configuration Setup Guide Part 1: Connecting your camera to local WiFi or Cellular Network. Part 2: Calibrating video on camera For more information, please visit our website www.MiFleet.us/support...
- Page 2 WiFi turns off. 6. Click on search to 4. With the Veyes app open, power find and connect to on MiFleet + Vision, wait until the LED your camera. Select changes from red to flashing green. the Camera’s serial number, it should be a 5.
- Page 3 13. Device is ready to use. Please turn vehicle ignition off, wait 1 minute then turn the ignition back on. Your device will now show in MiFleet + Vision platform. If you need to calibrate video, please continue to Part 2. If not, you may now un-install the app, it is not needed for further use.
- Page 4 MiFleet + Vision device WiFi AP signal will stay 3 minutes after boot up, if nothing connects to the WiFi within 3 minutes after boot up, then device will switch off. If device shuts off the SSID will disappear and you will have to reboot device.
- Page 5 2. Click on the squares in the top right hand corner of your screen to access your applications. 3. Click on MiFleet + Vision icon that brings you to the MiFleet + Vision platform (left bottom). 4. Adjust lens front to back and side to side for both exterior facing camera and interior facing camera.
Need help?
Do you have a question about the +Vision and is the answer not in the manual?
Questions and answers