Vibration Model; Beep Model; Led Light Model - AGPtek DC2R Manual

(2) Thread the collar strap through the slots on the receiver, and tie it to the dog.

2. Vibration Model

(1) Press Mode button of controller, switch to Vibrate Mode (the small icon can be seen at the upper
part of the LED screen). Press UP/DOWN button on the right side confirming LCD display is not to be 0.
(2) Press Y button, Receiver collar will vibrate, that means Vibration function works.

3. Beep Model

(1) Press Mode button of Controller, switch to Beep Mode (the small icon can be seen at the upper
part of the LED screen).
(2) Press the Y button and receive collar will beep, that mean Beep Function works.

4. LED Light Model