Using The Four Models (After Encoding Is Completed); Shock Model; Use The Shock Function - AGPtek DC2R Manual

◎ Using The Four Models (after encoding is completed)

Four modes can be altered by pressing the MODE button of controller.

1. Shock Model


Test the static shock function
（1) Take out the test bulb from the package and put it on the Receiver collar's contact points.
(2) Press MODE button of controller, switch to Shock Mode (the small icon
left of the LED screen). Press UP/DOWN button on the right side confirming LCD display is not to be 0.
(3) Press Y button and observe the change of test bulb. You can see flash light in the middle of test bulb
that means the shock function works.


Use the shock function

(1) When using the shock function, you need to install the receiver's contact column. According to the size
of the dog and dog hair length, choose the right column for your dog between the tall one and short one.
can be seen at the upper