Makita DVC867L Instruction Manual page 9

Installing the powder filter (HEPA)
and prefilter (for dry dust)
CAUTION:
Never pick up water or other liq-
uids or wet dusts when using the powder filter.
Picking up such things may cause the powder filter
breakage.
To use powder filter:
1. Place the prefilter in the tank while aligning the
mounting position markings.
2.
Mount the damper on the powder filter and then
place them in the prefilter while aligning the mounting
position markings.
3. Mount the tank cover and lock it.
6
6
6
► 1. Tank cover 2. Powder filter (HEPA) 3. Damper
4. Prefilter 5. Tank 6. Mounting position marking
NOTICE:
Before using the powder filter, make
sure that prefilter and damper are used together. It
is not allowed to install powder filter alone.
Installing the paper pack
Optional accessory
WARNING:
When using the paper pack, also
use the prefilter together that is preinstalled on
the tool. Failure to use the prefilter together may
cause unusual noise and heat, resulting in a fire.
CAUTION:
Before using the paper pack, make
sure that powder filter, damper and prefilter are
always used together.
1. Extend the paper pack.
2. Align the paper pack opening with the dust suction
opening of the cleaner.
3.
Insert the cardboard part of the paper pack onto
the holder so that it is positioned at the end beyond the
detent protrusion.
1
1
► 1. Paper pack 2. Holder
Installing the polyethylene bag
2
Cleaner can also be used without polyethylene bag.
However, using polyethylene bag is easier to empty the
3
tank without letting your hands dirty.
Spread the polyethylene bag in the tank. Insert it
between the holder plate and the tank, and pull it to the
4
hose inlet.
5
► 1. Holder plate 2. Polyethylene bag
9 ENGLISH
2
1
2