Hiding And Adding Pages - Universal Remote Control MASTERCONTROL RF20 Owner's Manual

33

Hiding and Adding Pages

Each of your RF20 Components actually contains eight pages. However, only five pages
are visible in the factory default setting. Three page are hidden in each Component.
If you wish to use the hidden pages, you can ADD it. If you don't want to use some of
the existing pages, you can HIDE them. You can add or hide pages on Components OR
on your favorite channel pages using this simple process:
NOTE: Be sure to program your Macros before you hide pages with potential macros in them. You
can't access hidden pages during macro setup. However, after you finish Macro setup, you can hide
pages without affecting operation of your macros.
STEP 1:
Press and hold the MAIN and ENT (Enter)
buttons at the same time for approximately 3
seconds, until the word "SETUP" is
displayed at the top of the LCD screen. This
signals that you are now in setup mode.
IMPORTANT:You now have 30 seconds to perform
the next step while you are in SETUP mode. If you
don't press a button within 30 seconds, SETUP will
disappear from the screen, signaling that you have
exited setup mode and you will need to start over.
EDIT
BUTTON
STEP 2:
Press the EDIT display button on the LCD
screen.
STEP 3:
Press the PAGE display button once the
screen changes to EDIT mode.
PAGE
BUTTON
This page is hidden. To ADD This page is visible.To HIDE
it, press the LIGHT button. it, press the LIGHT button.
STEP 4:
"PAGE" appears at the top of the screen.
Now, you can navigate to any page, using
the MAIN,
PAGE
COMPONENT,
BUTTON
FAV, and PAGE
FAV
display
BUTTON
buttons.
COMPONENT
BUTTONS
MAIN
BUTTON
STEP 5:
When you select a page, the top of the
screen indicates whether you want to
"ADD?" or "HIDE?" the page displayed.
When you want to change a page's visi-
bility (i.e., either ADD or HIDE), simply
press the LIGHT button.
STEP 6:
You can continue to ADD or HIDE pages
on other Components by repeating Steps
4 and 5.
STEP 7:
When you are finished adding and hiding
pages, press the MAIN button four times
to return to normal operation.
34