Table of Contents
Advertisement
33
Re-setting RF10 to Original Factory
Default Settings
If you want to start with a clean slate, you can re-set the
RF10 its original factory default settings by performing the
following steps.
NOTE: This process will essentially erase EVERYTHING
you have programmed into the RF10.
STEP 1:
Press and hold both the
POWER OFF button and the
STOP button for 10 seconds.
Continue to hold both buttons
as the display flashes ERASE
ten times, then RESET.
The RF10 will then display a
self-testing routine for a few
seconds, then automatically
return to normal operating
mode.
POWER OFF
BUTTON
STOP
BUTTON
34
Hide quick links:
Advertisement
Table of Contents
