Advertisement
Local Extender Unit Connections
1.
Status LEDs
•
Power: Solid green when power is applied.
•
Status: Solid green when link is present between extenders, Flashing
when waiting for connection to remote extender.
•
Host: Solid green when connected to host PC; flashes green when in a
suspended state.
2.
USB 3.0 Type B port
3.
Link Port (Duplex LC)
Remote Extender Unit Connections
1.
Status LEDs
•
Power: Solid green when power is applied.
•
Status: Solid green when link is present between extenders, Flashing
when waiting for connection to local extender.
•
Host: Solid green when connection is established between local extender
and host PC; flashes green when in a suspended state.
2.
(2) USB 3.0 Type A ports
3.
Link Port (Duplex LC)
4.
5V DC Power Input
1.
Verify all components included with the extender set are present
before installation.
2. Remove the white sticker covering the USB 3.0 port that reads
"Important Step: Disable Suspend Settings on your computer prior to
using this product".
3. Ensure your computer's suspend settings have been disabled.
4. Connect USB 3.0 cable between the computer and the Host device.
5. Connect a 2-strand 50/125 multimode fiber optic cable with Duplex LC
connectors to the link port on both local and remote extender units.
6. Connect the remote device(s) to the client extender.
7.
Connect the included power supply to the Client extender.
8. Power on all USB 3.0 devices.
Instructions
Advertisement
