Owner Responsibilities; Tilting And Handling; Sharp Edges - ABB Terra 54 Series Installation Manual

1.5.1

Owner responsibilities

The owner and site operator are required:
• To operate the charge station with the protective devices installed and to make
sure all protective devices are correctly installed after carrying out installation or
maintenance.
• To write an emergency plan that instructs people what to do in case of emer-
gency.
• To prepare the site where the charge station will be installed, according to the re-
quirements described in this guide.
• To make sure that there is enough space around the charger to carry out mainte-
nance work.
• To appoint a person responsible for the safe operation of the charge station and
for the coordination of all work.
• The owner is cautioned that changes or modifications not expressly approved by
ABB could void the owner's authority to operate the equipment and ABB's war-
ranty policy
• Neither ABB nor its affiliates shall be liable to the purchaser of this product or
third parties for damages, losses, costs or expenses incurred by purchaser or
third parties as a result of: an accident, misuse or abuse of this product or unau-
thorized modifications, repairs or alterations to this product, or failure to strictly
comply ABB operating and maintenance instructions.
1.5.2

Tilting and handling

1.5.3

Sharp edges

2 0 18 - 10 - 03
CAUTION
Various
Identifies a hazard that could result in damage to the ma-
chine, other equipment, and/or environmental pollution
NOTICE
Contains remarks, suggestions or advice.
WARNING
Heavy equipment
The Terra 54 weighs about 350 kg. Handling Instructions:
1. Use crane, forklift or pallet truck when lifting or moving
the Terra 54.
2. Do not drop the Terra 54.
3. Do not exceed a tilting angle of 30°.
WARNING
Sharp metal edges
There could be sharp metal edges inside the Terra 54. It is
recommended to wear mash protecting gloves when work-
ing inside the charger.
TER R A 54 / 54 H V C H AR G ER
8/40