Draper DA200 Instructions Manual

Oil free compressors

Hide thumbs Also See for DA200:

Instructions manual (16 pages)

Instruction manual (22 pages)

Table Of Contents

Quick Links

COMPRESSORS

■ STOCK No.30561

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE

DA25/180

This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which

should be kept with the machine.

This manual describes the purpose for which this tool has been designed and contains all the necessary

information to ensure its correct and safe use. We recommend that this manual is read before any operation of

the machine, before performing any kind of adjustment to the machine, and prior to any maintenance tasks. By

following all the general safety instructions contained in this manual, it will ensure both machine and operator

safety, together with longer life of the tool itself.

All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the

machine.

Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool

policy of continuous improvement determines the right to make modifications without prior warning.

OIL FREE

60607

64260

60606

• INSTRUCTIONS •

SAFE AND EFFECTIVE USE OF THIS TOOL.

GENERAL INFORMATION

■ PART No.DA200

DA200

DA6/200

DA6/201

D A25/180

01/2005

Table of Contents

Need help?

Do you have a question about the DA200 and is the answer not in the manual?

Questions and answers

Summary of Contents for Draper DA200

Page 1 DA25/180 GENERAL INFORMATION This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which should be kept with the machine. This manual describes the purpose for which this tool has been designed and contains all the necessary information to ensure its correct and safe use.
Page 2: Table Of Contents
Maintenance ....................6 Optional Accessories ..................7 Trouble shooting guide ................... 8 DECLARATION OF CONFORMITY Draper Tools Ltd. Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF. England. Declare under our sole responsibility that the product: Stock Nos:- 30561, 60606, 60607 & 64260.
Page 3: Contents/Declaration
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you produce a dated receipt or invoice to verify your proof of purchase within the 12 month per iod.
Page 4: Power Supply
(i.e. red). Fuse covers are available from your Draper Tools stockist. If the fitted plug is not suitable, it should be cut of f and destroyed. *The end of the cable should now be suitably prepared and the correct type of plug f itted.
Page 5: General Safety Warning
IMPORTANT Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which it was designed. If you are unsure of its relative applications do not hesitate to contact us in writing and we will advise you.
Page 6: Getting To Know Your Compressor
GETTING TO KNOW YOUR AIR COMPRESSOR DA6/200 DA200 & DA6/201 AIR RECEIVER- stores air. HANDLE. COWLING- covers, protects hot/moving parts. MOTOR COWLING- covers, protects hot/moving parts. PRESSURE REGULATOR- adjusts output air pressure. PRESSURE GAUGE- indicates receiver air pressure. AIR OUTLET CONNECTOR.
Page 7: Operation
Connect the compressor to the power supply. Fig.1. Always turn on and off by the appropriate switch. TURNING ON AND OFF (DA6/200/DA6/201, DA25/180, DA25/200 - NOT DA200): THE ON/ OFF SWITCH. (A) Fig.1. is located on the top of the pr essure switch box.
Page 8: Maintenance
MAINTENANCE IMPORTANT: Fig.5. Before performing any maintenance operations, disconnect the compressor from the power supply and release all the air from the receiver, until the pressure gauge reads zero. EVERY DAY: Drain the condensate from the receiver. The drain (H) Fig. 5. is situated on the underside of the receiver tank for the DA25/200, Fig.6.
Page 9: Optional Accessories
Hose (15.2M) - working Line Hose (15.2M) length - working length Part No.4309. Part No.4307. Stock No.36942. Stock No.36940. 3 pce Air Line Coupling Set Part No.ACK2. Stock No.37844. See Draper Catalogue for full range of PCL couplings and fittings - 8 -...
Page 10: Trouble Shooting Guide
IMPORTANT: PLEASE NOTE ALL REPAIRS/ADJUSTMENTS SHOULD BE CARRIED OUT BY A QUALIFIED PERSON. SHOULD THE MACHINE REQUIRE TRANSPORTING TO A REPAIR AGENT, ENSURE IT IS WELL PROTECTED AGAINST DAMAGE IN TRANSIT. DRAPER HELPLINE (023) 8049 4344 - 9 -...
Page 11 NOTES - 10 -...
Page 12 ©Published by Draper Tools Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without pr ior permission in writing from Draper Tools Ltd.

This manual is also suitable for:

Da6/200 Da6/201 Da25/180 30561 60607 64260 ... Show all