Advertisement
Quick Links
Advertisement
Related Manuals for Lojer E
Summary of Contents for Lojer E
- Page 1 Pulley 14 and 20 kg Models E and K OPERATING INSTRUCTIONS 01 03 2006...
-
Page 2: Table Of Contents
INDEX 1. INSPECTION OF THE DELIVERY ..................3 2. INSTALLATION.......................3 3. UTILIZATION ........................3 3.1 A ....................3 DJUSTING THE WEIGHTS 3.2 A ..................4 DJUSTING THE DRAWING HEIGHT 3.3 C ................5 HANGING OF THE PULLEY HANDLE 3.4 C ....................5 HANGING OF THE ROPE 4. -
Page 3: Inspection Of The Delivery
3. Utilization 3.1 Adjusting the weights In the E- and K-Pulleys you can adjust the weights at 0,5 – 1,0 kg intervals by placing the adjusting fork in a slot under the desired weight amount. There is also available a set of extra weights (3 x 0,250 kg, see: Accessories) that you can add above the weight stack when needed. -
Page 4: Adjusting The Drawing Height
Picture 3. The weight stack of the K-model. Adjustment fork and the extra weights. The place for the extra-weights (when not used) is in front of the pulley. 3.2 Adjusting the drawing height You can adjust the drawing height by moving the adjustment device along the adjusting bar (the clear tube with holes aside). -
Page 5: Changing Of The Pulley Handle
You may change the pulley handle by opening the hook at the end of the rope and attaching the new handle into its place. There are various types of handles available for LOJER Pulleys. You receive the standard triangle handle with the Pulley. 3.4 Changing of the rope The condition of the rope must be regularly checked and the rope must be replaced by a new one when its outer surface is clearly worn. -
Page 6: Accessories
6. Accessories Following accessories are available for LOJER E-Pulleys: • A set of extra weights (3 x 0,250 kg) • Padded ankle / wrist band • Padded thigh / shoulder band • Padded waist band • Rotation band • Support bar •...