Temperature Measurement & Face Recognition View - TKH Skilleye SEP-FRTMP01 User Manual

Temperature Measurement & Face Recognition Terminal User Manual
temperature measurement sensor (5cm-20cm away from the temperature sensor) to get
the accurate value.
Please have a rest after strenuous exercise and then test the temperature. If there is sweat
5.
on the forehead, please wipe it and take a rest and then test the temperature.
The installation height shall fit the height of the detected people. Note that the
6.
temperature measurement module shall not be higher than the height of the detected
people.
Note: If your terminal is a wrist temperature measurement terminal, please come closer, raise
your wrist and then make your inside wrist point at the temperature measurement sensor (1~5cm
away from the TM sensor).
4.1.2 Temperature Measurement & Face Recognition View
After configuring temperature measurement and face match, the temperature and face match
result can be viewed on the screen.
When detecting a face, the device will display the following interface.
Please measure the body temperature according to the above-mentioned temperature
measurement requirements.
Abnormal temperature: the red block and temperature will be shown.
Normal temperature: the green block and temperature will be shown.
If "Trigger Alarm Audio" is selected, you will hear the alarm voice.
15