Reset To Default; Backup; Restore; Firmware Update - Data-Tronix DT-ATSC-IP-8 User Manual & Installation Manual

Selecting "Reset to Default" will automatically reset all saved settings back to factory default settings. All saved
settings will be lost.

Backup

We highly recommend saving your device's setting.
Select Administration tab.
1.
Select backup from the menu.
2.
Locate and name file for future use.
3.

Restore

1. Select Administration tab.
2. Select "Choose file" menu.
3. Locate the required file to be imported.
4. Select "Upload settings" to import the selected file into the device.
Note: backup can be imported to assist in setting up new or multiple devices onsite.
Remember to save and backup any and all changes.

Firmware Update

Use the Firmware upgrade section to import new FW versions.
Select Administration tab.
1.
Select "Choose file" menu.
2.
Locate the required image file to be imported.
3.
Select "Upload image" to import the selected file into the device.
4.
Note: backup can be imported to assist in setting up new or multiple devices onsite.
Remember to save and backup any and all changes.
NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | | DT-ATSC-IP-8 Manual v1.0
****Caution****
Page 12