Table of Contents
Advertisement
Once the Streaming Setup is completed the system will parse and populate the Streaming Setup page.
Enable each stream by checking the check box.
1.
- To Disable the stream- uncheck the check box.
Enter output Streaming Destination address into Streaming Destination field.
2.
Enter TTL value as required.
3.
Save and Confirm all changes.
4.
Select RF Tab 2 thru RF Tab 8 and enter stream Destination and TTL on each RF tab.
5.
Save and Confirm all changes on each tab.
6.
Network Setup
4.
Management / GUI IP Address Setup
Management IP Setup
1. Select Network Setup tab to manage the IP Address of the device.
2. Modify Hostname as required.
3. Select DHCP or Static IP.
4. For Static IP: Select Static IP and enter Static IP address for device. (record New IP address).
5. Enter Subnet Mask.
6. Enter Default Gateway.
7. Save and Confirm all changes.
NACE:
610-429-1511
| sales@datatronix.biz | www.datatronix.biz | | DT-ATSC-IP-8 Manual v1.0
Page 10
Advertisement
Table of Contents
