3D Stunt Mode - Protocol VERT I Instruction Manual

3D STUNT MODE

3D Mode will remove the auto-stabilizers and allow the plane to perform stunts.
This is best for advanced users as it is more difficult to control the plane in this
mode.
Make sure you have plenty of space to perform the stunts and the area is clear
of people and obstacles.
In 3D Stunt Mode, you can perform loops and rolls:
Loop:
1. Fly straight and level with the throttle at its center.
2. Push the throttle to full power and hold.
3. Gently pull back all the way on the direction stick and hold.
4. When the plane is completely upside down, gently pull the throttle all the
way down while leaving the direction stick in place.
5. Next, gently push the direction stick back to its center and increase the
throttle to even out the plane.
Roll:
1. Fly straight and level with the throttle at its center.
2. Push the direction stick up and then to the left or right immediately after.
3. Return the direction to the center immediately after the plane completes
a roll.
10