Hyper-Extension Support Elbow
Materials
Anchors in 50 mm NRX
reinforcements in 30 mm NRX
1
Start by applying the two NRX
Strap PLUS anchors about 10-12
cm above and below the elbow
joint.
3
Apply the second 50 mm NRX
the ulnar side of the upper anchor. The two criss-cross straps will now provide a dynamic extension support.
4
The 30 mm NRX
Strap PLUS can be used to reinforce the extension support to be more distinct. Apply the strap in the
®
center line of both of the 50 mm NRX
Mediroyal Nordic AB · Box 7052 · 192 07 Sollentuna · Sweden · Tel +46 8 506 766 00 · info@mediroyal.se · www.mediroyal.se
Strap PLUS, Hyper-extension straps in 50 mm NRX
®
Strap PLUS.
®
2
®
Apply the 50 mm NRX
to the radial part of the upper anchor.
®
Strap as a criss-cross strap, starting from radial side of the lower anchor and attaching it on
Straps. Adjust tension if you want more distinct support.
®
– One strap, unlimited options!
Strap on the ulnar side of the lower anchor and attach it
®
Strap and strap
®
Need help?
Do you have a question about the NRX STRAP and is the answer not in the manual?
Questions and answers