Riverside Perspectives 28027 Assembly Instructions

Riverside
email: info@riverside-furniture.com

Components and Hardware List

Seat Control
Chair Seat
& Back
A B
1 pc.
5
-18 x 25mm
Caster
16
Allen Head Bolt
F
G
5 pcs.
Step 1: Fit the bottom end of the Pneumatic Cylinder (E) into center of the Metal Base Frame as shown. Press down
firmly on the Pneumatic Cylinder to secure. Place the plastic Covers onto the cylinder.
Step 2: Press the Casters (F) into the holes of the Metal Base Frame.
Step 3: Using your Phillips screwdriver, remove the screw from one end of each metal strap attached on the
bottom side of each Wood Base Cap (D). Pivot the metal strap 90 degrees and place the Wood Base Cap on
top of each leg of the Metal Base Frame. Pivot the metal strap back across the Wood Base Cap and reattach
with the Screw and your Phillips Screwdriver. Repeat for all Wood Base Caps.
If present, remove the
plastic cover from the top
end of the cylinder before
assembling to seat.
E
Perspectives
Wood Back Uph Desk Chair
FURNITURE
Assembly Instructions
Metal Base
Frame
C
1 pc. 1 pc.
5
" x 12 x 2mm
16
16
Spring Washer
H
4 pcs.
4 pcs.
E
D
Wood Base
Pneumatic
Cap Cylinder &
Cover
D E
5 pcs.
5
" x 19 x 2mm
4mm Allen key
Flat Washer
J
I
4 pcs.
C
Made in Viet Nam
28027, 28127, 28227
1 pc.
1 pc.
F
TOOLS REQUIRED
(NOT PROVIDED)
Page 1 of 2