Adjusting The Visor, Fig . J; Maintenance, Cleaning, Storage And Transportation; Durability; Disposal - FLORABEST FFSH 3 A1 Translation Of The Original Instructions

Adjusting the visor, fig . J

You can adjust the distance between the visor
and your face by moving the visor manually (see
fig . J) .
Alternatively, you can flip the visor
up .
Maintenance, cleaning, storage
and transportation
■ Examine the components for damage and signs
of wear before each use .
■ Always clean the helmet after finishing your
work .
■ Use a moistened cloth to clean the helmet, ear
protectors and visor . Never use petrol, solvents
or cleansers which can damage plastic .
■ To disinfect the helmet and ear protectors, use
only cleaning agents that do not contain sol-
vents or aggressive substances .
■ Store the helmet, ear protectors and visor in a
clean, dry environment away from UV rays .
■ The helmet can be transported in the box in
which it was sold .

Durability

■ The materials used for the helmet age naturally .
Only use the helmet for a maximum period of
5 years .
Please refer to the fold-out page (fig . M) for
the date of manufacture . The same symbol is
imprinted into the helmet .
FFSH 3 A1

Disposal

all the way
currently applicable regulations . Please contact
your waste disposal facility if you are in any doubt .
Dispose of all packaging materials in an environ-
mentally friendly manner .

Service

Importer

KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE - 44867 BOCHUM
GERMANY
www .kompernass .com
Dispose of the product via an approved
waste disposal company or your munici-
pal waste disposal facility . Observe the
Service Great Britain
Tel .: 0871 5000 720 (£ 0 .10/Min .)
E-Mail: kompernass@lidl .co .uk
Service Ireland
Tel .: 1890 930 034
(0,08 EUR/Min ., (peak))
(0,06 EUR/Min ., (off peak))
E-Mail: kompernass@lidl .ie
IAN 292272
GB │ IE │ 11 ■