Pairing The Headphones With A Bluetooth Device Using Nfc - Sennheiser MOMENTUM Wireless M3AEBTXL Instruction Manual

Pairing the headphones with a Bluetooth
device using NFC
1. Activate NFC on your Bluetooth device.
2. Switch the headphones on (> 16).
3. Place your Bluetooth device close (less than 3 cm) to the NFC
antenna in the right ear cup of the headphones.
You hear the voice prompt "Pairing" and the LED flashes blue and
red.
4. Click "Yes" if a confirmation dialog for Bluetooth pairing appears
on the screen of your Bluetooth device (this step may vary
depending on your Bluetooth device).
If pairing was successful, you hear the voice prompts "Pairing
successful" and "Device (1) connected". The LED lights up blue for
2 seconds.
1
ON
ON
3
Pairing
"Pairing"
< 3 cm
2
OFF
4
Connected
2s
MOMENTUM Wireless M3AEBTXL | 13
Using the headphones
ON
Click
"Pairing
successful"
"Device (1)
connected"
MOMENTUM 3 ON