Group Scan Mode - Uniden UH044DP Operating Manual

UNIDEN Model UH044DP DELUXE PACK UHF CB Radio
OPERATION
1. If SCAN is deactivated while in an active channel,
the UH044 will stay on that active channel. If no
other channels are active, the UH044 will reinstate
the starting channel.
2. If OS Scanning is initiated when there are no
channels programmed in OS memory, an error tone
will be heard and scanning will not start.
3. Press and hold
GROUP SCAN(GS) Mode
To use GS Mode Scanning, press and
hold the key. GS icon
appears on the display.
1. When is pressed during
Group Scan Mode, icon will blink
and Group Scan Scanning begins.
2. To deactivate GS scan, press
1. If SCAN is deactivated while
it is tuned to an active
channel, the UH044 will stay
on that active channel. If
none of the channels re-
active, the UH044 will
reinstate the Priority channel.
2. If GS Scanning is initiated
when there are no channels
programmed in GS memory,
an error tone will be heard
and scanning will not start.
3. Press and hold
to Open Scanning.
will switch to Group Scanning.
or .
will switch
16