Unpacking The Simplex Mk Ii; Assembly - Well Tempered Lab Simplex MK II Instruction Manual

Unpacking the Simplex MK II

Carefully remove components as required from the foam packaging.
Take care that none of the fluids contaminate the surfaces of your Simplex MK II turntable.
The Simplex MK II packaging has been designed to protect it from the hazards of shipping. It is advisable to save it for further use.
Important: Never place a Well Tempered Lab turntable in direct sunlight. Not only will it have detrimental effects on your valuable
recordings, it will impair the mechanical integrity and performance of your turntable.

Assembly

For ease of assembly we recommend a flat work surface, such as a table or bench. All necessary tools have been provided.
1. Install bearing cup in plinth adjust to approx. 40mm (1.6in) above plinth and tighten set screw. See Fig (1).
Fig (1)
2. Install tonearm suspension pillar to approx 95mm (3.8in) above plinth and tighten set screw. Complete with tonearm suspension
rod. See Fig (2).
Fig (2)
3