Well Tempered Lab Simplex MK II Instruction Manual page 5

2. With a small amount of care take tonearm and apply one and a half turns of the nylon suspension from the golf ball around the
azimuth adjustment collar. See Fig (5).
Fig (5)
3. Correct bridle length when tonearm is suspended is approximately 25mm from top of tonearm to bottom of suspension rod. See
Fig (6). Apply a complete anti-clockwise twist to the azimuth adjustment collar and install on the suspension rod. The twist on the
nylon suspension effectively applies the correct anti-skate. See Fig (6) - (9). Correct azimuth adjustment is achieved by rotating the
azimuth collar in the directions of the arrows.
Fig (6)
5