Table of Contents
Advertisement
Brought to You by Augusta Flint
Item
Electrical Requirements
Spindle RPM Adjustments
Chuck Diameter
Chuck Capacity
Reverse Jaws
Tool Post Capacity
Tool Post Style
Weight
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and as-
sembly diagram. Keep your invoice with this manual. Write the invoice number
on the inside of the front cover. Keep this manual and invoice in a safe and dry
place for future reference.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
1.
KEEP WORK AREA CLEAN AND DRY. Cluttered, damp, or wet work areas
invite injuries.
2.
KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle
this product.
3.
STORE IDLE EQUIPMENT. When not in use, tools and equipment should be
stored in a dry location to inhibit rust. Always lock up tools and equipment, and
keep out of reach of children.
4.
DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS. Read warning labels on prescriptions to determine if your judgement or
reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this product.
SKU 04019
PRODUCT SPECIFICATIONS
120 Volt / 60 Hz / 65-95 Watts / 1 Amp
Motor: 2 Speed (High, Low)
Motor RPM: 5490 High Speed
Motor RPM: 3850 Low Speed
130, 200, 350, 560, 920, 1500, 2450, 4000
2-1/2”
2-1/4”
Included
Up To 1/2”
Quick Change
24 Pounds
SAVE THIS MANUAL
PAGE 2
Description
Advertisement
Table of Contents
