Download
Share
Print this page
Central Machinery 58358 Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Central Machinery Manuals
  4. Lathe
  5. 58358
  6. Owner's manual & safety instructions
Central Machinery 58358 Owner's Manual & Safety Instructions

Central Machinery 58358 Owner's Manual & Safety Instructions

5-speed wood pen lathe
Hide thumbs

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual (or month and year of purchase if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
22g

Advertisement

loading
Need help?

Need help?

Do you have a question about the 58358 and is the answer not in the manual?

Questions and answers

Related Manuals for Central Machinery 58358

Summary of Contents for Central Machinery 58358

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Table Of Contents

    3. KEEP WORK AREA CLEAN. 6. MAKE WORKSHOP KID PROOF with padlocks, Cluttered areas and benches invite accidents. master switches, or by removing starter keys. Page 2 For technical questions, please call 1-888-866-5797. Item 58358...
  • Page 3 12. SECURE WORK. Use clamps or a vise to hold work when practical. It’s safer than using your hand and it frees both hands to operate tool. Item 58358 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 7. Use lowest speed when starting new workpiece. for the specific hazards in the work area. 8. DO NOT OpERATE WITH ANy GUARD DISABLED, DAMAGED, OR REMOVED. Moving guards must move freely and close instantly. Page 4 For technical questions, please call 1-888-866-5797. Item 58358...

  • Page 5: Safety

    If you feel any medical or physical symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible. SAVE THESE INSTRUcTIONS. Item 58358 For technical questions, please call 1-888-866-5797. Page 5...

  • Page 6: Specifications

    1. To install the Tool Rest, loosen the Lock Lever. Insert the Tool Rest into the Tool Rest Base. Retighten the Lock Lever to secure the Tool Rest in place. Tool Rest Lock Lever Tool Rest Base Page 6 For technical questions, please call 1-888-866-5797. Item 58358...
  • Page 7 Functions Lock Headstock Lever Headstock pulley cover Spur center Live Tailstock center Tool Rest Balance Wheel Handwheel Slide plate Switch Item 58358 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8 3. To prevent accidents, turn off the tool and unplug then plug in the tool. the tool from its electrical outlet after use. Clean, then store the tool indoors out of children’s reach. 2. Turn on the tool. Page 8 For technical questions, please call 1-888-866-5797. Item 58358...
  • Page 9 Lever to release tension from the Drive Belt. 3. Tighten Lock Lever to hold motor in raised position. Side plate Belt Tension Lever Lock Lever pulley cover Drive pulley Drive Belt Item 58358 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10 7. Move the Belt Tension Lever down, adjusting tension so that 1/2″ of Drive Belt deflection is measured then retighten the Lock Lever. pulley cover DRIVE pULLEy 1/2″ DEFLEcTION DRIVE BELT MOTOR pULLEy Page 10 For technical questions, please call 1-888-866-5797. Item 58358...
  • Page 11 Rest Base along the Bed to the desired Tool Rest vertically or swivel it as needed. position. Then retighten the Lock Handle. Then retighten the Lock Lever. Tool Rest Lock Lever Tool Rest Base Lock Handle Item 58358 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12 Tail Axis bottoms out, causing the Live Center to be forced out of the Tail Axis. Note: Hold Live Center with one hand to prevent it from falling and being damaged. Page 12 For technical questions, please call 1-888-866-5797. Item 58358...
  • Page 13 120 volt, grounded electrical outlet. to the ″OFF″ position. To lock the Power Switch in the ″OFF″ position, remove the Safety Key and store it in a safe location. Item 58358 For technical questions, please call 1-888-866-5797. Page 13...
  • Page 14 11. Make sure to test the set up by hand turning the workpiece to ensure there is enough clearance all the way around before starting. Live Headstock Tailstock center Spur center Handwheel Balance Tool Wheel Rest power Switch Page 14 For technical questions, please call 1-888-866-5797. Item 58358...
  • Page 15 16. To mount the workpiece to a backing block, make the backing block from a piece of scrap wood that is flat on both sides. 17. Mark the center of the backing block. Item 58358 For technical questions, please call 1-888-866-5797. Page 15...

  • Page 16: Maintenance

    WARNING! If the supply cord of this 2. AFTER USE, wipe external surfaces power tool is damaged, it must be replaced of the tool with clean cloth. only by a qualified service technician. Page 16 For technical questions, please call 1-888-866-5797. Item 58358...
  • Page 17 Do not operate lathe until it is repaired by a qualified service technician. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 58358 For technical questions, please call 1-888-866-5797. Page 17...

  • Page 18: Parts List And Diagram

    Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175437822 when ordering parts. Page 18 For technical questions, please call 1-888-866-5797. Item 58358...
  • Page 19 Assembly Diagram 18 21 Item 58358 For technical questions, please call 1-888-866-5797. Page 19...

  • Page 20: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.