Wall Mounting The Base - Uniden WDSS 5315 Owner's Manual

Wall Mounting the Base

This phone can be mounted on any standard wall plate.
) Snap the wall mount adapter into the notches on the base top.
2) Plug the AC adapter into the DC IN 9V jack.
3) Wrap the AC adapter cord inside the molded wiring channel as
shown.
4) Plug the AC adapter into a standard 240V AC wall outlet.
5) Plug the telephone cord into the TEL LINE jack.
6) Plug the telephone cord into the telephone outlet.
7) Align the mounting slots on the base with the mounting posts on
the wall. Then push in and down until the phone is firmly seated.
Note: DO NOT use an AC outlet controlled by a wall switch.
Wall plate Wall plate
AC outlet AC outlet
3
AC adapter AC adapter