Table of Contents
Advertisement
For ELITE8815/ELITE8815+1
1
Press and hold the Registration
button at the underside of the base.
2
Keep pressing the Registration
button until the handset charge
LED on main base starts to blink.
3
On the handset, press and hold the
#
key until you hear a beep.
Registration button
For Main Base Models ELITE8855/ELITE8855+1
1
With the main base in standby mode (i.e. not being used), press
menu/select
on the base.
2
Use the up/down key to select
3
Use the up/down key to select
4
The base LCD screen will display the following prompt:
On handset, press and hold "#" key for 2 sec
5
On the handset, press and hold the
De-register the handset
1
Press and hold
end
and
#
Deregister Hs
.
2
The phone will ask you to confirm the deregistration. Select
Select
Replacing Base
been registered to another base and you want to register to a new
base.
.
System Setup
.
Register Handset
#
key until you hear a beep.
for more than 5 seconds. Select
at instruction 1 if handset has previously
(4)
Yes
.
Advertisement
Table of Contents
