Register The Handset - Uniden WDECT3315 Owner's Manual

Register the Handset

YoU neeD to regIster the WDeCt3305
to the maIn Base Before Use!
If the WDECT3305 has not been registered
before then the display will show....
'Place handset on main base to register'
The WDECT3305 must show this display before
proceeding to the registration procedure. If the
WDECT3305 was de-registered from another
base, select 'System Reset' from handset menu
then select 'Replacing Base' and select 'Yes'.
The above display will then show.
1 Before registering the
handset, the battery
pack must be charged
for 15-20 hours.
2 Find the base model you wish to register the
WDECT3305 handset to and follow the instructions
for that model.
• WDeCt3315 and
WDeCt3355 series.
Place the extra handset
in the main base unit
to begin registration
(Picture is the
WDECT3315 series
main base).
1
Charge the handset
WDECT3305
for 15-20 hours.
Handset
Charger
2
WDECT3305
Handset
Place the WDECT3305
handset in the main
base to register.
Main Base
[ 4 ]