Tray Mounts; Lanyard Mount; Accessory Port - Ikelite 6170.70 Instruction Manual

Tray Mounts

This housing features two 1/4-20 threaded tray mounts on the bottom
of the housing. The spacing between the tray mounts is 3" (76.2 mm).
Optional tray with handles and mounting hardware are sold separately.
It is recommended to detach and thoroughly rinse the tray mounts,
tray, and mounting hardware, with fresh water routinely during
continuous use and prior to storage.

Lanyard Mount

The included lanyard is a break-away safety lanyard which is designed
to break if stress is placed on it. This is important so that the user can
break free if the equipment is caught on something underwater.
The lanyard is not designed to support the weight of the housing and
should not be used as a carrying strap. Carrying the housing by the
lanyard may result in damage to the lanyard and/or housing.
A different lanyard with a thin cord may be attached to the housing
using the lanyard mount on the corner of the housing.

Accessory Port

This housing features one spare accessory port which may be used
for the attachment of optional accessories. This port accepts fittings
designed for a 1/2" through or 1/2-20 threaded hole.
The optional Vacuum Kit # 47012 may be installed in this location. A
hand pump with gauge allows you to draw a vacuum on the house
to simulate water pressure and check for leaks prior to entering the
water.
Visit ikelite.com for an updated list of compatible products.
Do not remove or loosen the accessory port plug unless you
»
are installing a compatible accessory.
8