Advertisement
Installation location and important notes:
•
Ensure airflow is not obstructed.
•
The wall mounting should be performed by a qualified person to avoid hazards.
•
Observe the minimum distances between the device and ceilings, ground and
walls.
•
Ensure there are no cables or other pipelines behind the wall to avoid damage prior
to drilling.
1.
Remove the wall brackets and expansion screws from the box, then insert the
screws into the wall so that they line up with the holes of the wall brackets:
2.
Align the 4 holes in the back of the heater with the 4 hooks on the wall bracket and
push it on, then slide them into the slots to click on:
Hook
Hook
Expansion Screw
Expansion Screw
Advertisement
