Advertisement
Setting Temperature
The temperature can only be set under Comfortable or Economical mode. Under ECO and
Frost-free modes, the set temperature is locked to 18°C and 5°C respectively. Press the
temperature button, then use the UP/DOWN buttons to set the temperature between 15°C
to 50°C. The setting will be memorised and confirmed after 10 seconds.
•
When the ambient temperature is equal to the preset temperature, the power will
automatically switch from Comfortable mode to Economical mode.
•
When the ambient temperature is 2°C higher than the preset temperature, the
heater will stop heating.
•
When the ambient temperature is 2°C lower than the preset temperature, the
heater will switch to Comfortable mode again.
Note:
The set temperature must be set to a temperature higher than the ambient
temperature; otherwise, the unit will not function.
Timer Setting
Press the Timer Button, then use the UP/DOWN buttons to set the timer from 0-24 hours.
When the timer status is active, the "
memorised and confirmed after 10 seconds.
•
If the timer is set under Frost Free status, it will function to switch the heater ON.
•
If the timer is set while the heater is running, it will function to switch the heater
OFF.
For example, if you set the timer to 01:00 under Frost Free status, the heater will switch on
after one hour. If you then set the timer to 01:00 while the heater is operating, it will switch off
after one hour.
Note:
These functions may both be achieved using the remote control as well as the
control panel.
" timer symbol will flash. The setting will be
Advertisement
