Getting Started; Connect The Power; Charge The Batteries - Uniden UDW-10003 User Manual

Connect the Power

1. Connect one AC adapter to the camera's power input and the other to the receiver's power
input. (The two adapters are exactly the same.)
2. Connect the other end of each adapter to a standard 120 volt AC indoor outlet.
3. Press the
POWER
Power status light) should turn on.
If...
a light
Power status
doesn't come on

Charge the batteries

The batteries in your camera and receiver will charge whenever the power is connected. Let the
batteries charge completely (about 8 hours) before you unplug the camera and receiver to move
them around. (You can still use the camera and receiver: just keep them plugged in.)
4

Getting Started

POWER POWER
button button
L I N K L I N K
button on both the receiver and the camera; the bottom light on the left (the
Try...
- reconnecting the AC adapter
- seeing if the power outlet is controlled by a wall switch
POWER POWER
button button