Additional Features - Uniden UBC780XLT Operating Manual

The following additional features are designed for you to customise your scanner. Once
these features have been turned on or off, they will remain as they are set until you reset
them, even if you turn the scanner off and then on again.
Dimmer
To change brightness of the display:
1. Press .
MENU
2. Press E to select SYSTEM DATA.
3. Press E to select DIMMER.
4. Select one from High-Medium-Off using
Enter Lock
You can lockout the keypad to prevent any accidental entry. To activate this feature:
1. Press MENU.
2. Press E to select SYSTEM DATA.
3. Press to select ENTER LOCK then press E.
4. Set to ON using
The icon appears on the display when locked.
Key Beep Option
To choose beep sound on or off:
1. Press MENU.
2. Press E to select SYSTEM DATA.
3. Press to select KEY BEEP and then press E.
4. Set to ON or OFF using
Screen Mask
The trunk, frequency, receiving mode, and signal meter indications on the display are
masked when this feature is activated. (except while in Search mode) This feature reduces
the amount of displayed information.
1. Press MENU.
2. Press E to select SYSTEM DATA.
3. Press to select SCREEN MASK and then press E.
4. Set to ON or OFF using
5. To quickly turn off the screen mask, press the VFO/SELECT control.

Additional Features

or and then press E.
or and then press E.
or and then press E.
or and then press E.
58