Repairs; Birdies - Uniden UBC69XLT Owner's Manual

80 channels with 3 band plan
Hide thumbs Also See for UBC69XLT:
Table of Contents

Advertisement

UB334 Paper OM reduced size.fm Page 39 Friday, September 9, 2005 11:16 AM
Clean the outside of the scanner with a mild
detergent.
To prevent scratches, do not use abrasive
cleaners or solvents. Be careful not to rub the
LCD window.
Do not use excessive amounts of water.

Repairs

Do not attempt any repair. The scanner contains no
user serviceable parts.

Birdies

All radios can receive "birdies" (undesired signals). If
your scanner stops during Scan mode and no sound
is heard, it might be receiving a birdie. Birdies are
internally generated signals inherent in the
electronics of the receiver.
Press L/O to lock out the channel, then press Scan
to resume scanning.
If you still cannot get satisfactory results while using
your scanner or if you want additional information,
please call or write the Uniden Parts and Service
Division. The address and phone number are listed
in the Warranty at the end of this manual.
Care and Maintenance
39

Advertisement

Table of Contents
loading

Table of Contents