Table of Contents
Advertisement
3.3.2 Chipset Configuration
Share Memory
Configure the size of memory that is allocated to the integrated graphics
processor when the system boots up.
Active LFP
Use this to enable or disable the LFP. The default value is [Disabled].
Onboard HD Audio
Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio feature.
Onboard LAN 1
This allows you to enable or disable the Onboard LAN 1 feature.
Onboard LAN 2
This allows you to enable or disable the Onboard LAN 2 feature.
Deep S5
Mobile platforms support Deep S5 in DC only and desktop platforms sup-
port Deep S5 in AC only. The default value is [Disabled].
Restore on AC/Power Loss
Select the power state after a power failure. If [Power Off] is selected, the
power will remain off when the power recovers. If [Power On] is selected,
the system will start to boot up when the power recovers.
USB Power Control
Use this to adjust USB power control.
27
Advertisement
Table of Contents
