Table of Contents
Advertisement
Network Bridge Communication
N e t w o r k B r i d g e C o m m u n i c a t i o n
This projector is equipped with NETWORK BRIDGE function.
When the projector connects to the computer by wired or wireless LAN
communication, an external device connected with this projector by RS-232C
communication can be controlled from the computer as a network terminal.
For details, see the 7. Network Bridge function in the Ne t w o r k G u i d e .
NOTE • If data is transferred via wireless and wired LAN at the same time,
the projector may not be able to process the data correctly.
Connection
If you use wired LAN, connect the computer's LAN port and the projector's
1 .
LA N port with a LAN cable. Use the cable that fulfi lls the specifi cation shown
in fi gure. If you use wireless LAN, insert the USB wireless adapter into the
projector's W I RE LE S S p o r t .
Connect the projector's CONTROL port and the RS-232C port of the devices
2.
that you want to control with a RS-232C cable.
Turn the computer on, and after the computer has started up turn the
3.
projector on.
Set the COMMUNICATION TYPE to NETWORK BRIDGE in the
4 .
COMMUNICATION menu of the OPTION - SERVICE menu.
1 6
W I RE LE S S p o r t
LAN
LA N o r
H D B a s e T p o r t
• LAN c a
b l e ( CAT -5 e o r g r e a t e r )
U S B w i r e l e s s a d a p t e r
CONTROL
RS-232C
Advertisement
Table of Contents
