Zamel Exta LKM-03 Instruction Manual

POWER SUPPLY INDICATOR LKM-03
DESCRIPTION
The LKM-03 power supply indicator is
designed for single-phase system volt-
age signalling. Voltage presence is being
signalled by means of a high-brightness
LED. Various LED colour versions are
available (red, green, yellow).
FEATURES
● Single-phase voltage presence
optical signalling,
● High-brightness LED applied,
● High durability optical indicator
applied,
● Various LED colours available,
● Easy applicable together with atypi-
cal systems,
● monomodular casing,
● TH-35 DIN rail installation.
The device is designed for
three-phase installation and
must be installed in accor-
dance with standards valid
in a particular country. The
device should be connec-
CAUTION
ted according to the details
included in this operating manual. Installa-
tion, connection and control should be car-
ried out by a qualified electrician staff, who
act in accordance with the service manual
and the device functions. Disassembling
of the device is equal with a loss of guaran-
tee and can cause electric shock. Before
installation make sure the connection
cables are not under voltage. The cruci-
form head screwdriver 3,5 mm should be
used to instal the device. Improper trans-
port, storage, and use of the device influ-
ence its wrong functioning. It is not advi-
sable to instal the device in the following
cases: if any device part is missing or the
device is damaged or deformed. In case
of improper functioning of the device con-
tact the producer.
The symbol means selective
collecting of electrical and electronical
equipment. It is forbidden to put
the used equipment together
with other waste
Zakład Mechaniki i Elektroniki
ZAMEL sp.j.
J.W. Dzida, K. Łodzińska
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04
www.zamelcet.com, e-mail: marketing@zamel.pl
TECHNICAL DATA
Power terminals: L, N
Rated voltage: 230 V~
Rated voltage tolerance: -15 ÷ +10 %
Rated frequency: 50 / 60 Hz
Rated current for 10/20/30 versions: 3,5 mA / 15 mA / 15 mA
Power supply indicator: LED
Number of terminal clamps: 2
Section of connecting cables: 0,2 ÷ 2,5 mm
Ambient temperature range: -20 ÷ +45
Operating position: freely
Protection degree: IP20 (PN-EN 60529)
Protection level: II
Overvoltage category: II
Pollution degree: 2
Dimensions: monomodular (17,5 mm) 90x17,5x66 mm
Reference standards: PN-EN 60947-5-1
APPERANCE
Power terminal (L)
Voltage indicator
INSTRUCTION MANUAL
LKM-03
2
C
o
Mounting: rail TH 35 (PN-EN 60715)
Weight: 45 g
Power terminal (N)
VER. 001_20.01.2010